[Gvsig_english] using gvsig mobile with internal gps / using itonwm 6.5
Marcel Schoolmeesters
schoolmeesters at gmx.de
Wed Apr 6 04:03:30 CEST 2011
Well, I have started the project again (in a new workspace) and copied
my whole own changes 1:1 into the code... and everything is working now.
I don't know why. The only thing, I have not tested yet, is the adding
of new German SRS (copying those projection files) ...I'll test it
tomorrow and will let you know.
Regards,
Marcel
Am 06.04.2011 00:25, schrieb Marcel Schoolmeesters:
> And, me again. I've probably not finally tested everything on IBM J9 -
> the same problem appears while using the dropdown button in WM6. so of
> course, it is a JVM (J9) problem - phoneme does not produce the error.
> Even using the "...forJ9"-version with phoneme works fine.
>
> BTW, in fact, the coordinates are not displayed until i close the drop
> down menu! and even when they are displayed, they won't be updated -
> until i open AND close the dropdown menu again.
> And additionally, it is the same with the MEASURES_BAR...while viewing
> coordinates. They are only displayed and updated after open/close of
> the drop down menu.
>
> Obviously, as the statusbar worked before adding anything to the code,
> it is my fault. But I don't understand, why phoneme does not reproduce
> the error.
>
> After changing from combo to normal menu, the error still exists. I'll
> test everything right from the beginning...and hope to find the error.
>
> If anybody has got an idea, I would appreciate it for saving time :)
>
>
> Regards,
>
> Marcel Schoolmeesters
>
>
>
> Am 05.04.2011 14:11, schrieb Marcel Schoolmeesters:
>> Ah, I forgot the picture. But as I said, it seems to be a problem of
>> the drop down which I added to the gpsbar. but why is it shown
>> correctly with phoneme?
>>
>>
>> Am 05.04.2011 14:08, schrieb Marcel Schoolmeesters:
>>> Thanks, my comments are between the lines :)
>>>
>>> Regards
>>> Marcel
>>>
>>>
>>> Am 05.04.2011 13:41, schrieb Juan Lucas Dominguez Rubio:
>>>> Hello,
>>>> > however, the statusbar was not shown and the coordinates were
>>>> > shown above the toolbar...a bit strange.
>>>> unheard-of... can you send pictures of that?
>>> well, I've looked at my pictures again. I did not have much time
>>> while testing as it is not my own device. So I checked them again
>>> and it seem to be a problem of the dropdown button. The downloaded
>>> (not changed) version it works fine :) however, with phoneme the
>>> problem does not exist...
>>>
>>>> > In addition, some visual
>>>> > aspects changed, like white and black are replaed by each other,
>>>> I think.
>>>> could that be the device's own look-and-feel?
>>> well as mentioned before, I cannot check it again...at least not at
>>> once...but I think, some symbols are missing...I cannot clearly say,
>>> perhaps I need to check it again next weekend for example...perhaps
>>> I can get the device again.
>>>
>>>> > ...was not shown in ToC ...
>>>> the layer name in the TOC is the only place where you can see
>>>> missing words?
>>> cannot tell exactly, did not have much time to check everything...I
>>> hope, I can check it again.
>>>> As for the permission dialogs: that's normal. some devices ask the
>>>> user before using executable files (exe and dll) then keep a record
>>>> of "allowed files", so they dont ask again unless you reinstall the
>>>> software. that's actually a configurable feature of windows mobile.
>>>> Most PDA have it disabled by default.
>>> ok, I thought so...
>>>> If someone is interested in tuning that sort of thing, you can use
>>>> for example CeRegEditor: http://ceregeditor.mdsoft.pl/
>>>> Regards,
>>>> Juan Lucas Domínguez Rubio
>>>> ---
>>>> Prodevelop SL, Valencia (España)
>>>> Tlf.: 96.351.06.12 -- Fax: 96.351.09.68
>>>> http://www.prodevelop.es <http://www.prodevelop.es/>
>>>> ---
>>>>
>>>> ------------------------------------------------------------------------
>>>> *De:* gvsig_internacional-bounces at listserv.gva.es en nombre de
>>>> Marcel Schoolmeesters
>>>> *Enviado el:* mar 05/04/2011 12:51
>>>> *Para:* Users and Developers mailing list
>>>> *Asunto:* Re: [Gvsig_english] using gvsig mobile with internal gps
>>>> / using itonwm 6.5
>>>>
>>>> ok, thanks for the comments,
>>>>
>>>> I tested it on an Sasung Omnia GT-B7610 yesterday, and I've tested
>>>> both, J9 and PhoneME...of course, I have deleted the dll, as I have
>>>> read the information before ;) but however, the statusbar was not
>>>> shown and the coordinates were shown above the toolbar...a bit
>>>> strange. In addition, some visual aspects changed, like white and
>>>> black are replaed by each other, I think.
>>>>
>>>> With phoneme, the statusbar was shown correctly. but the layername
>>>> was not shown in ToC (so it cannot be deleted, only disabled) - in
>>>> phoneME I have used the current version, placed the folder in
>>>> device directory and installed gvsig mobile and before starting,
>>>> started config.exe, right?
>>>> Well, I've got many dll-requests which I had to confirm before it
>>>> would continue...but I think, the request does not come twice?
>>>>
>>>>
>>>> About GPS, I'll test perhaps later, but that's ice to know, that it
>>>> should work with assigning a serial port to it.
>>>>
>>>>
>>>> Regards,
>>>> Marcel
>>>>
>>>>
>>>> Am 05.04.2011 12:09, schrieb Rahkonen Jukka:
>>>>
>>>> Hi,
>>>> When it comes to internal GPS, all the units I have been using
>>>> have been assigning the GPS into one of the serial ports. Some
>>>> have had this as an option for some other native communication
>>>> port. The PDA can have a selection in the GPS settings
>>>> for giving the number of the virtual serial port to be used for
>>>> output, and gvSIG Mobile must be configured to use the same
>>>> port. I have been using gvSIG Mobile with a few Trimble models,
>>>> M3 Mobile PDA and Thales Mobile Mapper.
>>>> -Jukka Rahkonen-
>>>> ------------------------------------------------------------------------
>>>> *Lähettäjä:* gvsig_internacional-bounces at listserv.gva.es
>>>> [mailto:gvsig_internacional-bounces at listserv.gva.es] *Puolesta
>>>> *Juan Lucas Dominguez Rubio
>>>> *Lähetetty:* 5. huhtikuuta 2011 12:59
>>>> *Vastaanottaja:* Users and Developers mailing list; Users and
>>>> Developers mailing list
>>>> *Aihe:* Re: [Gvsig_english] using gvsig mobile with internal
>>>> gps / using itonwm 6.5
>>>>
>>>> Hello, yes it should work also on WM 6.5
>>>> If you are using the J9 version, you need to remove one of
>>>> the DLL files under \J9 folder:
>>>> \J9\PPRO11\bin\j9jit23.dll
>>>> Also, what do these files say?
>>>> \gvSIGMobile\g_mobile_launch_log.txt
>>>> \gvsig_mobile_is_alive.txt
>>>> (this one is in the root of the file system)
>>>> Regards,
>>>> Juan Lucas Domínguez Rubio
>>>> ---
>>>> Prodevelop SL, Valencia (España)
>>>> Tlf.: 96.351.06.12 -- Fax: 96.351.09.68
>>>> http://www.prodevelop.es <http://www.prodevelop.es/>
>>>> ---
>>>>
>>>> ------------------------------------------------------------------------
>>>> *De:* gvsig_internacional-bounces at listserv.gva.es en nombre
>>>> de Marcel Schoolmeesters
>>>> *Enviado el:* mar 05/04/2011 0:39
>>>> *Para:* Users and Developers mailing list
>>>> *Asunto:* [Gvsig_english] using gvsig mobile with internal
>>>> gps / using it onwm 6.5
>>>>
>>>> Hello,
>>>>
>>>> anybody used gvsig mobile with WM 6.5 ?
>>>>
>>>> I am trying to emulate it with WM 6.5.3 DTK, but it does
>>>> not seem to work.
>>>>
>>>>
>>>> Additionally, is it possible to use the internal GPS?
>>>> without Serial
>>>> port? or does it have an assigned serial port in windows
>>>> mobile? does
>>>> anybody know?
>>>>
>>>>
>>>> Best regards,
>>>>
>>>> Marcel
>>>> _______________________________________________
>>>> Gvsig_internacional mailing list
>>>> Gvsig_internacional at listserv.gva.es
>>>> http://listserv.gva.es/cgi-bin/mailman/listinfo/gvsig_internacional
>>>>
>>>>
>>>> _______________________________________________
>>>> Gvsig_internacional mailing list
>>>> Gvsig_internacional at listserv.gva.es
>>>> http://listserv.gva.es/cgi-bin/mailman/listinfo/gvsig_internacional
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Gvsig_internacional mailing list
>>>> Gvsig_internacional at listserv.gva.es
>>>> http://listserv.gva.es/cgi-bin/mailman/listinfo/gvsig_internacional
>>>
>>>
>>> _______________________________________________
>>> Gvsig_internacional mailing list
>>> Gvsig_internacional at listserv.gva.es
>>> http://listserv.gva.es/cgi-bin/mailman/listinfo/gvsig_internacional
>>
>>
>> _______________________________________________
>> Gvsig_internacional mailing list
>> Gvsig_internacional at listserv.gva.es
>> http://listserv.gva.es/cgi-bin/mailman/listinfo/gvsig_internacional
>
>
> _______________________________________________
> Gvsig_internacional mailing list
> Gvsig_internacional at listserv.gva.es
> http://listserv.gva.es/cgi-bin/mailman/listinfo/gvsig_internacional
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listserv.gva.es/pipermail/gvsig_internacional/attachments/20110406/ebdfd653/attachment.htm
More information about the Gvsig_internacional
mailing list